Home / Products / All / PPprint Printing-Kit for Raise3D E2 Series

PPprint Printing-Kit for Raise3D E2 Series

$ 140.00
PPprint Printing-Kit for Raise3D E2 Series

PPprint Printing-Kit for Raise3D E2 Series

$ 140.00

Congratulations! You added this item to your Cart.

Continue shopping

Go to Shopping Cart

Products of the ‘PPprint Printing-Kit for Raise3D E2’:

P-surface 141 (330mm x 240mm)
P-adhesive 220 (330mm x 240mm)
P-roller 621
P-wipe 515
P-cleaner 298

The ‘PPprint Printing-Kit for Raise3D E2’ enables simple, high quality and reporoducible 3D printing of polypropylene (PP) on the Raise3D E2 series. The printing kit consists of the 3d printing bed ‘P-surface 141‘ (330mm x 240mm), the adhesive film ‘P-adhesive 220’ (330mm x 240mm), the ‘P-roller 621’ for applying the 3d printing bed, the P-cutter, as well as the ‘P-wipe 515’ and the ‘P-cleaner 298’ for cleaning and maintenance of the ‘P-surface 141’.

P-filament 721 print profile for Raise3D E2 Series

Cleaning and maintenance of the ‘P-surface 141’: Before first use, wash out the ‘P-wipe 515’ thoroughly with lukewarm water. Shake ‘P-cleaner 298’ thoroughly before use. To clean the ‘P-surface 141’, apply enough of the ‘P-cleaner 298’ to evenly cover the entire surface when spread with a paper towel. After a short exposure time (approx. 1 minute), the ‘P-cleaner 298’ can be completely removed with a paper towel. Finally, the ‘P-surface 141’ should be wiped off with the moistened ‘P-wipe 515’. After use, rinse the ‘P-wipe 515’ in clear water, wring it out carefully and then pull it into shape. Do not dry the ‘P-wipe 515’ in the sun or on radiators.

Security alert:

DANGER: May be fatal if swallowed or if inhaled. Causes skin irritation. Causes severe eye irritation. Keep out of the reach of children. Wear protective gloves/eye protection IF INGESTIONS: Immediately call TOXIC INFORMATION CENTER/Medical Doctor/First Aid. IF ON SKIN TOUCH: Wash with plenty of soap/water. DO NOT induce vomiting. IF IN CONTACT WITH EYES: Rinse gently with water for several minutes. Remove any contact lenses if possible. Continue rinsing. If eye irritation persists, seek medical advice/attention. Dispose of the contents/container in accordance with local regulations. Contains: Hydrocarbons (C11-C14), n-alkanes, isoalkanes, cyclics, <2% aromatics, butyl glycol, amides, coco, N,N-bis(hydroxyethyl).