Certified 3rd Party Accessories

All you need for sure adhesion of 3D prints Magigoo is an easy to use 3D printing adhesive designed to address ‘the first layer not sticking problem’. Magigoo ensures a strong adhesion to the hot plate. But the magic starts when printing is ready: just wait for the plate to cool down and then remove your prints with just a finger flick! In addition, Magigoo helps to prevent warping. Isn’t it magic? Regardless of you being a hobbyist or professional – it is extremely rewarding to have a 30 hour print complete without any warping and having it release easily once cooled.

• Over 100 applications
• ABS, PLA, PETG, HIPS, ASA, TPU
• Easy application
• Easy release
• Easy clean
• No smell
• Non-toxic
• No additional tools needed
• Easy to transport
• Nicer print finish

Main Features

• Easy application: applying Magigoo is as easy as child’s play. Shake, press, apply. Spread on an active printing area only. No need to cover the whole surface.
• Easy-release: Magigoo adhesive properties are designed to release the 3D print once the build plate has cooled.
• Easy-clean: Magigoo is easily cleaned with water.
• Long-lasting: Magigoo last for 100+ average prints.
• Odorless and safe: Magigoo is safe to use – be it in a closed room or educational workshop with kids.

Important note: The applicator has an active spring valve, which activates when applicator is pressed against the build plate. Please do not press the bottle as “ketchup bottle” , otherwise the applicator may pop off. Bottle may be slightly squeezed, only when the nib is pressed against the bed and it may be necessary only if bigger flow is required. Bottle must not be squeezed when cap is off any other time as it may result in glue popping out of the bottle.

Technical Data Sheet
Safety Data Sheet

WHAT: MAGIGOO PA is designed for professional use, to work exclusively with Polyamide filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.

WHY: PA (polyamide) describes a group of polymers with an amide repeat unit. Generally in the FDM industry there are 3 main types of PA which include PA12, PA6,6 and PA6, sometimes these materials can be either grafted with other polymers or else reinforced with glass or carbon fibres. Generally nylons exhibit high strength, toughness, elasticity, wear resistance, chemical resistance and thermal resistance and are widely sought in various industrial applications.

Nylon filaments prove to be challenging materials for FDM printing due to their lower adhesion to conventional 3D-printing build surfaces and their higher tendency to warp. Furthermore there are several classes of PA filaments each behaving differently. MAGIGOO-PA is a specialized solution for FDM printing of PA filaments which was developed to work with a wide number of PA types

HOW: MAGIGOO PA has been designed and tested to work with different PA and fiber reinforced filament brands.
Shake the bottle.
Apply to the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed.
Print according to the filament/ 3D printer manufacturers recommendations.
Allow to cool and Remove. The print should pop right off.
Clean – Use a damp cloth to wipe off.

SAFETY: Using this product with other than PA type filaments might cause over adhesion and damage your build surface.

Tips: For larger prints a 20 mm brim is recommended
In cases of excess adhesion, it is recommended to wet print bed with a small amount of water slowly work it below the part, this should make part removal easier.

Technical Data Sheet
Safety Data Sheet

Outside Dimension: 340mm (L) x 285mm (W) x 350mm (H)

Dry and feed two filament spools with a 200mm (8”) outside diameter (OD).
It’s the ultimate filament dryer you need for quality 3D printing!

Digital Display

• Easily adjust the temperature with 5 presets (35ºC, 45ºC, 55ºC, 65ºC, 75ºC, and 85ºC).
• Built-in timer with a maximum time of 48 hours.

Double Wall Structure

Spool Adapter included

• 2 metal shafts
• 4 big spool adapters
• 4 small spool adapters

WHAT: MAGIGOO PP is designed for professional use, to work exclusively with polypropylene filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off if the included procedure is followed.

WHY: Polypropylene (PP) is a thermoplastic semi-crystalline polymer exhibiting properties of good impact resistance and ductility. It also has a relatively non-polar molecular structure which makes it chemical resistant and thus ideal for use in food packaging and medical equipment. It is in fact well known in the adhesive industry that it is difficult to adhere polyolefin materials to other types of materials. This combined by the partial crystallinity makes it an especially hard material to print with. Magigoo PP solves this issue and provides additional convenience for use in FDM 3D Printing.

HOW: MAGIGOO PP has been designed and tested to work with different PP filament brands.
Shake the bottle vigorously.
Apply to the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed.
Print according to the filament/printer manufacturers recommendations
Allow to cool and Remove – The Part should become easier to remove after suf?cient cooling. If the part is hard to remove, a scraper should be used to assist part removal.
Clean – Use a wet hard sponge to remove all glue residue. Once the glue layer is wet it will form a white layer which can be easily scrubbed off with an abrasive sponge. Once the layer is completely loose from the glass it can be wiped away with a wet cloth and ?nally cleaned with a dry paper towel.

SAFETY: This adhesive is for professional use. Contact with eyes causes serious eye damage, Wash hands and exposed skin thoroughly after handling.

Tips: For larger prints a 20 mm brim with multiple layers is recommended.
In cases of excess adhesion, it is recommended to wet print bed with a small amount of water slowly work it below the part, this should make part removal easier.

Technical Data Sheet
Safety Data Sheet

NylonG is a glass-fiber reinforced nylon for 3D printing, offering excellent impact-resistance, incredible tensile strength, and great inter-layer adhesion. It retains dimensional accuracy better than standard nylon and absorbs large amounts of kinetic energy, making it ideal for parts that need to withstand repeated shock. The filament creates clean, complex parts in various colors with no post-processing needed and pairs well with Ionic support materials for dual extrusion prints.

• Glass fiber-infused for extra strength and impact resistance
• Excellent at absorbing large amounts of kinetic energy
• Produces clean, complex parts with no post-processing needed