Raise3D T700 large-format 3D printer, front view of the enclosed build chamber.

Raise3D T700 large-format 3D printer, front three-quarter view showing the right side.

Raise3D T700 large-format 3D printer, front three-quarter view showing the left side.

Raise3D T700 Large Build Volume 3D Printer

The Raise3D T700 is a large-format FFF 3D printer with a 700 × 500 × 1,000 mm build volume and a full meter of build height, giving you room for larger prototypes, jigs, fixtures and tooling. Its TwinFlow™ system combines two filament paths with a single nozzle, supporting single extrusion, dual extrusion and dual-extrusion high-flow modes.

A 0.6 mm nozzle is supplied as standard, with a 0.4 mm option available. With a maximum nozzle temperature of 420°C, an actively heated chamber up to 60°C and a heated build plate up to 120°C, the T700 supports a range of material workflows. Camera monitoring and print detection functions help you follow the job from the printer interface.

$ 15,999.00

Type: T700 3D Printer

T700 3D Printer T700 3D Printer with 2*2.5kg Filament Boxes

Quantity:

Estimated shipping

January 2027.

$ 15,999.00

Add to cart

Raise3D T700 Large Build Volume 3D Printer

$ 15,999.00

Add to cart

Meet the Raise3D T700

The Raise3D T700 provides a 700 × 500 × 1,000 mm build volume for large or tall prototypes, jigs, fixtures and tooling. TwinFlow combines two filament paths with a single nozzle, supporting single extrusion, dual extrusion and dual-extrusion high-flow modes.

A nozzle temperature up to 420°C, actively heated chamber up to 60°C and heated build plate up to 120°C support material-specific printing workflows. Camera monitoring, print detection functions and a flexible double-sided PEI plate complete the workflow from preparation to part retrieval.

700 × 500 × 1,000Build volume · mm

420°CMaximum nozzle temperature

60°CMaximum heated chamber temperature

TwinFlow™Two feed paths · one nozzle

Why Choose the T700?

Built for large-part printing, the T700 combines TwinFlow extrusion, controlled motion and active chamber heating with print monitoring and a flexible PEI build surface.

TwinFlow Single-Nozzle Extrusion

TwinFlow brings two filament paths together at one nozzle, with single-extrusion, dual-extrusion and dual-extrusion high-flow modes. Choose the mode and compatible material combination for your job without an XY offset between two separate nozzles.

High-Speed Motion System

The T700 supports print speeds up to 600 mm/s and acceleration up to 30,000 mm/s². Watch the printhead in motion as it builds the sample layer by layer. Actual print speed varies with material, geometry and print settings.

High-Temperature Printing

The nozzle reaches up to 420°C, the actively heated chamber up to 60°C and the build plate up to 120°C. Set each temperature for the chosen material to manage printing conditions across the large build volume.

Dual-Spool Filament Feeding

Two filament paths feed the TwinFlow printhead for the selected extrusion mode. Plan filament loading and material changes around the job, and review filament-box or Raise3D Filament Station options for your configuration.

What Can You Make with the T700?

Use a 700 × 500 × 1,000 mm build volume for larger prototypes, manufacturing aids and form models. Plan the print orientation and support structures around the part’s geometry, material and intended use.

Large Housing Prototypes

Produce large housings in one piece to review overall form, fit and assembly before committing to production tooling.

Full-Scale Design Models

Explore full-scale wheel and other complex design models, including geometry and support strategies, within the T700 build volume.

Functional Mechanism Prototypes

Develop grippers and articulated mechanisms to evaluate movement, component fit and assembly through physical prototypes.

Software & Connectivity

A clear workflow from preparing your model to starting and monitoring your print.

Workflow illustration: prepare the model, transfer the file and print with Raise3D T700 Large Build Volume 3D Printer.

Prepare & Slice

Prepare your model and select suitable print settings in ideaMaker.

Transfer Your File

Choose a file-transfer method supported by your software and printer configuration.

Print & Monitor

Start the prepared file on the T700 and follow the print’s progress.

See the T700 in Action

From the first layers to the finished part, plan the T700 workflow around the material, support strategy and workspace. Keep time for cooling, inspection and safe part retrieval as well as printing.

Printing in Progress

Prepare the part orientation, supports and material profile in ideaMaker before starting the job. During printing, follow the part’s progress and check the build area through the available camera and printer interface.

Printhead in Motion

See the printhead lay down material across the build plate in a close-up view of the printing process.

From Large-Format Print to Part Removal

See the scale of the completed one-piece sample, then watch it being lifted out of the T700 build chamber.

7-Inch Touchscreen Control

View the T700’s 7-inch touchscreen and on-printer interface for checking print progress and accessing machine controls.

Materials & Compatibility

Choose among Hyper Speed, Industrial and Premium filaments, from everyday prototyping materials to reinforced grades and support materials. The lists below separate available materials from coming-soon releases; match the nozzle, preparation and ideaMaker profile to the specific grade.

Hyper Speed

PLA, PLA Pro, ABS, PETG CF and PET CF.

Industrial

Available: PPA CF, PET Support and PPS CF.

Coming soon: PPA GF, PET CF, PET GF, PETG ESD and PPA Support.

Premium

Available: PLA, ABS, ASA, PETG and TPU-95A.

Coming soon: PVA+.

T700 Technical Specifications

Printing & Hardware
Body & Dimensions
Build volume (W × D × H)	700 × 500 × 1,000 mm (27.6 × 19.7 × 39.4 in)
Machine size (W × D × H)	964 × 792 × 1,478 mm (37.9 × 31.1 × 58.2 in)
Maximum external package	1,150 × 1,060 × 1,685 mm (45.28 × 41.73 × 66.34 in)
Weight	Net: 150 kg (approximately 330.7 lb).
Frame material	Aerospace-grade aluminum alloy
Extrusion & Print Quality
Print technology	Fused Filament Fabrication (FFF)
Print head system	TwinFlow™ — dual extrusion with single-nozzle Y-junction manifold
Print modes	Single extrusion; dual extrusion; dual extrusion high flow
Nozzle diameter	0.6 mm default; 0.4 mm available
Nozzle type	High thermal conductivity CuCrZr base nozzle with solid wear-resistant SiC tip
Maximum nozzle temperature	420°C
Filament diameter	1.75 mm
Layer height	0.3 mm with a 0.6 mm nozzle
Printing precision	IT11 grade Test filament: Raise3D Premium PLA.
Speed & Flow
Maximum printing speed	600 mm/s
Maximum toolhead speed	1,500 mm/s [1]
Maximum toolhead acceleration	30,000 mm/s²
Maximum TwinFlow™ hotend flow	80 mm³/s [2]
Build Plate & Heated Bed
Build plate	Flexible double-sided PEI build plate
Leveling	Mesh-leveling with flatness detection
Heated bed material	Silicone heater pad
Maximum build plate temperature	120°C
Chamber Temperature Control
Active chamber heating	Available
Maximum chamber heating temperature	60°C
Electric top cover	Available
Auxiliary heat dissipation module	Available
Printing Environment
Filter	HEPA filter with activated charcoal
Operating environment	15–30°C; 10–90% RH, non-condensing
Storage environment	−25°C to +55°C; 10–90% RH, non-condensing
Electrical
Power supply	220V model: 200–240 VAC, 50/60 Hz; 230V @ 16A 110V model: 100–120 VAC, 50/60 Hz; 110V @ 20A

Materials, Software & Control
Materials & Availability
Raise3D materials	Hyper Speed: PLA, PLA Pro, ABS, PETG CF, PET CF. Industrial: PPA CF, PET Support, PPS CF. Premium: PLA, ABS, ASA, PETG, TPU-95A. Coming soon — Industrial: PPA GF, PET CF, PET GF, PETG ESD, PPA Support. Coming soon — Premium: PVA+.
Software
Slicing software	ideaMaker
Supported file types	STL, OBJ, 3MF, OLTP, STEP, STP, IGES, IGS
Supported operating systems	Windows, macOS, Linux
Machine code type	GCODE
Sensors & Cameras
Live camera resolution	1920 × 1080
Nozzle camera resolution	2592 × 1944
Available detection & recovery	Filament run-out sensor; power-loss recovery; flow rate detection; spaghetti detection; nozzle clumping detection
Connectivity & Network
Connectivity / network	Wi-Fi, LAN / Ethernet, USB port, live camera
Ports	USB 3.0 × 1; Ethernet × 1
Wi-Fi protocol	WPA / WPA2 / WPA3-PSK
Printer Controller
User interface	7-inch touch screen
Screen resolution	1024 × 600
Controllers	Motion: STM ARM Cortex-M7 550MHz DP-FPU Logic: RK ARM Cortex-A55 Quad 2 GHz
Memory	2 GB
Onboard flash	32 GB
Operating system	Debian
Electric door lock	Available
Neural processing unit	Up to 1 TOPS (INT8); mixed-precision INT8 / INT16 / FP16 / BFP16 computing

[1] Maximum toolhead speed was obtained at a toolhead acceleration of 10,000 mm/s². [2] Maximum flow depends on material, temperature, nozzle and print settings. Confirm material availability and the selected regional configuration before ordering.

Delivery & Workspace Preparation

Ships From

Stafford, TX 77477 (Greater Houston Area)

Delivery is available to most U.S. locations.

Dispatch Time

Preorder & Shipping

Available for preorder. Estimated to ship in January 2027.

Warranty

Confirm Warranty Terms

Confirm T700-specific coverage, conditions and exclusions before ordering.

Taxes

Taxes at Checkout

Applicable taxes are calculated and charged at checkout based on your shipping address.

Tax-exempt purchases

Submit your tax-exemption documentation at checkout. Sales-tax exemption applies after our review and approval. Review takes 1–2 business days.

Raise3D T700 Large Build Volume 3D Printer — Installation clearance diagram

Raise3D T700 Large Build Volume 3D Printer — Machine dimensions diagram

Select a diagram to open the full-size version. Illustrations are schematic, not to scale.

Plan the Complete Delivery Route

Check the complete delivery route against the maximum package dimensions of 1,150 × 1,060 × 1,685 mm. The machine measures 964 × 792 × 1,478 mm; check doorways, corners and lifts, and agree unloading arrangements before delivery.

Prepare the Installation Space

Provide an indoor operating environment of 15–30°C and 10–90% relative humidity, non-condensing. Keep room for front operation, top access, filament handling and maintenance, and obtain the required T700 service clearances from Raise3D.

Confirm Handling & Power

Arrange handling equipment suitable for a printer with a net weight of 150 kg. Check the selected electrical version and grounded supply: 110V @ 20A for the 110V version, or 230V @ 16A for the 220V version.

T700 Frequently Asked Questions

Find clear answers about fit, configuration, materials and getting your T700 ready to print.

Will my part fit the T700?

The build volume is 700 × 500 × 1,000 mm. Compare your part dimensions in the intended print orientation, allowing for supports and any required process clearance.

For a fit review, share the STEP or STL model, dimensions and material requirements with Raise3D. Include the functional or assembly requirements as well as the overall size.

Should I choose the T450 or T700?

Choose the T450 for parts that fit its 450 × 350 × 400 mm build volume. The T700 provides a 700 × 500 × 1,000 mm build volume for larger or taller layouts.

Compare the complete part and supports, the printer footprint and your installation requirements. A larger build volume does not by itself determine print time or throughput.

T450 vs T700 at a glance
Compare	T450	T700
Build volume (W × D × H)	450 × 350 × 400 mm	700 × 500 × 1,000 mm
Machine size (W × D × H)	710 × 635 × 785 mm	964 × 792 × 1,478 mm
Nozzle diameter	0.4 mm default; 0.6 mm available	0.6 mm default; 0.4 mm available
Choose when	Your part and supports fit the T450 build volume.	You need more width, depth or height for your part.

Compare your part orientation, support requirements and available installation space. Confirm materials and the selected configuration before ordering.

Can I discuss a sample print before buying?

Contact Raise3D to discuss a sample print for your application. Provide the model file, material preference, part dimensions and the features you need to evaluate, such as fit, surface finish or functional requirements.

Agree the sample configuration and evaluation criteria before using the result to plan production.

What electrical supply does the T700 require?

Check the electrical version supplied with your order. The 110V version is rated for 100–120 VAC, 50/60 Hz, with 110V @ 20A; the 220V version is rated for 200–240 VAC, 50/60 Hz, with 230V @ 16A.

Confirm the required grounded circuit with your installation provider before delivery.

How will the T700 be delivered and installed?

Allow for a maximum external package of 1,150 × 1,060 × 1,685 mm and a printer net weight of 150 kg. Check doorways, turns and lifts along the complete route, and arrange suitable unloading and handling equipment.

Confirm service clearances, electrical supply and installation arrangements with Raise3D before delivery.

Which materials and nozzle options are supported?

The standard nozzle diameter is 0.6 mm, with a 0.4 mm nozzle available. The nozzle uses a CuCrZr base and a wear-resistant SiC tip, with a maximum temperature of 420°C.

Available materials include Hyper Speed PLA, PLA Pro, ABS, PETG CF and PET CF; Industrial PPA CF, PET Support and PPS CF; and Premium PLA, ABS, ASA, PETG and TPU-95A.

Coming-soon materials are Industrial PPA GF, PET CF, PET GF, PETG ESD and PPA Support, and Premium PVA+. Match the specific grade, support combination and ideaMaker profile to the nozzle and application.

How can I check the T700 warranty terms?

Contact Raise3D for the warranty coverage, service terms and exclusions applicable to the T700 before ordering. Confirm the coverage period and service arrangements with your purchase terms.

Can I receive an invoice?

Yes, invoices are available upon request.

If you need an invoice for your purchase, please contact our US sales team at salesadmin@raise3d.us with your order number and billing details.

Our team will be happy to assist you with your invoice request.

What software and file-transfer options does the T700 support?

Use ideaMaker on Windows, macOS or Linux to prepare models and export GCODE. Supported model inputs include STL, OBJ, 3MF and STEP.

The T700 supports Wi-Fi, Ethernet and USB 3.0. Choose a supported transfer workflow and check that the job file matches the selected nozzle, material and printer configuration.

Choose Your T700 Configuration

Select the T700 printer or the configuration with two 2.5 kg filament boxes in the purchase section. Before placing your order, review the packing list, electrical version, delivery route and unloading arrangements with Raise3D.

Choose configuration

Need help evaluating your application? Contact Raise3D.

Raise3D T700 Large Build Volume 3D Printer

Meet the Raise3D T700

Why Choose the T700?

TwinFlow Single-Nozzle Extrusion

High-Speed Motion System

High-Temperature Printing

Dual-Spool Filament Feeding

What Can You Make with the T700?

Large Housing Prototypes

Full-Scale Design Models

Functional Mechanism Prototypes

Software & Connectivity

Prepare & Slice

Transfer Your File

Print & Monitor

See the T700 in Action

Printing in Progress

Printhead in Motion

From Large-Format Print to Part Removal

7-Inch Touchscreen Control

Materials & Compatibility

Hyper Speed

Industrial

Premium

T700 Technical Specifications

Delivery & Workspace Preparation

Stafford, TX 77477 (Greater Houston Area)

Preorder & Shipping

Confirm Warranty Terms

Taxes at Checkout

Plan the Complete Delivery Route

Prepare the Installation Space

Confirm Handling & Power

T700 Frequently Asked Questions

Choose Your T700 Configuration

You may also like