Raise3D T450 large-format 3D printer — front view on white background

Raise3D T450 large-format 3D printer — right three-quarter view on white background

Raise3D T450 printer showing the front door, side panel and touchscreen.

Close-up of the Raise3D T450 printhead and cooling fan.

Raise3D T450 printing a curved model with support structures inside the build chamber.

Raise3D T450 Large-format 3D Printer

Q: What does the warranty cover?

The Raise3D T450 comes with a 12-month limited warranty starting from the invoice date. The warranty covers defects in materials and workmanship under normal and reasonable use. Eligible defective components may be repaired or replaced at no additional charge, subject to Raise3D's warranty terms. Warranty services include remote technical support, eligible replacement parts, and software updates. The warranty does not cover normal wear and tear, consumables (such as nozzles, hotends, and build plates after first use), accidental damage, misuse, unauthorized modifications, or improper maintenance. For complete coverage details, exclusions, and warranty conditions, please refer to our T450 Full Warranty Terms .

The Raise3D T450 is a large-format 3D printer with a 450 × 350 × 400 mm build volume, giving you room to print larger prototypes, jigs, fixtures and tooling in one piece.

Its TwinFlow™ system combines dual extrusion with a single nozzle, supporting different printing modes to suit your material and application requirements. Equipped with a 0.4 mm nozzle as standard and capable of nozzle temperatures up to 420°C, the T450 supports a range of standard and engineering-grade filament workflows.

$ 4,999.00

Type: T450 3D Printer

T450 3D Printer T450 3D Printer 2*2.5kg Filament Boxes

Quantity:

Estimated shipping

Late December 2026.

$ 4,999.00

Add to cart

Raise3D T450 Large-format 3D Printer

$ 4,999.00

Add to cart

Meet the Raise3D T450

Print larger prototypes and tooling with the Raise3D T450. Explore its 450 × 350 × 400 mm build volume and TwinFlow single-nozzle dual extrusion.

450 × 350 × 400Build volume · mm

420°CMaximum nozzle temperature

70°CMaximum heated chamber temperature

TwinFlow™Two feed paths · one nozzle

Why Choose the T450?

Explore the extrusion, motion, temperature management and material delivery systems behind large-part printing.

TwinFlow extrusion

Two filament paths converge at a single nozzle. Choose the material mode and print profile for your application.

Four-motor motion system

See the motion system in operation, designed to support controlled movement during large prints.

Temperature management

Air Flow Manager thermal management supports material-specific printing workflows.

Filament loading and feeding

A closer look at spool mounting and filament insertion for print preparation.

What Can You Make with the T450?

Create prototypes, jigs, fixtures and tooling. Choose the material and part orientation to suit the geometry and working conditions.

Housing Prototypes

Evaluate the shape, fit and assembly of large housings before moving to production.

Detailed Structural Samples

Explore complex fins, thin walls and repeated features when developing functional part designs.

Jigs & Fixtures

Create positioning and assembly fixtures tailored to the geometry of your parts and production workflow.

Software & Connectivity

A clear workflow from preparing your model to starting and monitoring your print.

Workflow illustration: prepare the model, transfer the file and print with Raise3D T450 Large-format 3D Printer.

Prepare & Slice

Prepare your model and select suitable print settings in ideaMaker.

Transfer Your File

Choose a file-transfer method supported by your software and printer configuration.

Print & Monitor

Start the prepared file on the T450 and follow the print’s progress.

See the Printing & Finishing Process

Follow the sample from printing through removal and manual support cleanup. Results depend on the material, geometry and print settings.

Printing process

The part is built layer by layer, with the model and support structures developing together during the print. Plan the orientation, support strategy and material settings in ideaMaker before starting the job.

Before support cleanup

After printing, support structures remain around overhangs and recessed features. Let the part and build surface cool before removal, then identify the support contact areas that need to be cleared.

Support removal

Remove the support structures to reveal the printed geometry, working carefully around thin walls, openings and edges. The tools and cleanup approach depend on the part geometry and support material.

Surface and edge detail

Inspect the cleaned part’s openings, edges and support contact areas before checking fit or function. Surface finish depends on layer height, material and support settings; some applications may require additional finishing.

Materials & Compatibility

Choose from Hyper Speed, Industrial and Premium filaments. Match the filament, nozzle, support material and ideaMaker profile to your application.

Hyper Speed

PLA, PLA Pro, ABS, PETG CF and PET CF.

Industrial

Available: PPA CF, PET Support and PPS CF.

Coming soon: PPA GF, PET CF, PET GF, PETG ESD and PPA Support.

Premium

Available: PLA, ABS, ASA, PETG and TPU-95A.

Coming soon: PVA+.

T450 Technical Specifications

Printing & Hardware
Body & Dimensions
Build volume (W × D × H)	450 × 350 × 400 mm (17.7 × 13.8 × 15.8 in)
Machine size (W × D × H)	710 × 635 × 785 mm (28.0 × 25.0 × 30.9 in)
Maximum external package	880 × 772 × 1,076 mm (34.7 × 30.4 × 42.4 in)
Weight	Net: 75.9 kg (167.3 lb) Gross, carton only: 80 kg (176.4 lb) Gross, carton with pallet: 98.2 kg (216.5 lb)
Frame material	Aerospace-grade aluminum alloy
Extrusion & Print Quality
Print technology	Fused Filament Fabrication (FFF)
Print head system	TwinFlow™ — dual extrusion with single-nozzle Y-junction manifold
Print modes	Single extrusion; dual extrusion; dual extrusion high flow
Nozzle diameter	0.4 mm default; 0.6 mm available
Nozzle type	High thermal conductivity CuCrZr base nozzle with solid wear-resistant SiC tip
Maximum nozzle temperature	420°C
Filament diameter	1.75 mm
Layer height	0.2 mm with a 0.4 mm nozzle
Printing precision	IT11 grade Test filament: Raise3D Premium PLA.
Speed & Flow
Maximum printing speed	600 mm/s
Maximum toolhead speed	1,500 mm/s [1]
Maximum toolhead acceleration	30,000 mm/s²
Maximum TwinFlow™ hotend flow	80 mm³/s [2]
Build Plate & Heated Bed
Build plate	Flexible double-sided PEI build plate
Leveling	Mesh-leveling with flatness detection
Heated bed material	Silicone heater pad
Maximum build plate temperature	120°C
Chamber Temperature Control
Active chamber heating	Available
Maximum chamber heating temperature	70°C
Electric top cover	Available
Auxiliary heat dissipation module	Available
Printing Environment
Filter	HEPA filter with activated charcoal
Operating environment	15–30°C; 10–90% RH, non-condensing
Storage environment	−25°C to +55°C; 10–90% RH, non-condensing
Electrical
Power supply	220V model: 200–240 VAC, 50/60 Hz; 230V @ 10A 110V model: 100–120 VAC, 50/60 Hz; 110V @ 15A

Materials, Software & Control
Materials & Availability
Raise3D materials	Hyper Speed: PLA, PLA Pro, ABS, PETG CF, PET CF. Industrial: PPA CF, PET Support, PPS CF. Premium: PLA, ABS, ASA, PETG, TPU-95A. Coming soon — Industrial: PPA GF, PET CF, PET GF, PETG ESD, PPA Support. Coming soon — Premium: PVA+.
Software
Slicing software	ideaMaker
Supported file types	STL, OBJ, 3MF, OLTP, STEP, STP, IGES, IGS
Supported operating systems	Windows, macOS, Linux
Machine code type	GCODE
Sensors & Cameras
Live camera resolution	1920 × 1080
Nozzle camera resolution	2592 × 1944
Available detection & recovery	Filament run-out sensor; power-loss recovery; flow rate detection; spaghetti detection; nozzle clumping detection
Connectivity & Network
Connectivity / network	Wi-Fi, LAN / Ethernet, USB port, live camera
Ports	USB 3.0 × 1; Ethernet × 1
Wi-Fi protocol	WPA / WPA2 / WPA3-PSK
Printer Controller
User interface	7-inch touch screen
Screen resolution	1024 × 600
Controllers	Motion: STM ARM Cortex-M7 550MHz DP-FPU Logic: RK ARM Cortex-A55 Quad 2 GHz
Memory	2 GB
Onboard flash	32 GB
Operating system	Debian
Electric door lock	Available
Neural processing unit	Up to 1 TOPS (INT8); mixed-precision INT8 / INT16 / FP16 / BFP16 computing

[1] The maximum toolhead speed of 1,500 mm/s was obtained at a toolhead acceleration of 10,000 mm/s². [2] Flow test conditions: Raise3D Hyper Speed ABS V2, 250°C printing temperature, 0.4 mm nozzle and a single outer-wall smooth structure. Actual performance depends on material, geometry and print settings. Specifications are subject to change without notice.

Delivery & Workspace Preparation

Ships From

Stafford, TX 77477 (Greater Houston Area)

Delivery is available to most U.S. locations.

Dispatch Time

Preorder & Shipping

Available for preorder. Estimated to ship in late December.

Dispatch time; transit time is additional.

Warranty

1-Year Limited Warranty

Coverage, conditions and exclusions apply.

View full warranty terms →

Taxes

Taxes at Checkout

Applicable taxes are calculated and charged at checkout based on your shipping address.

Tax-exempt purchases

Raise3D T450 Large-format 3D Printer — Installation clearance diagram

Raise3D T450 Large-format 3D Printer — Machine dimensions diagram

Select a diagram to open the full-size version. Illustrations are schematic, not to scale.

Plan the Complete Delivery Route

Machine: 710 × 635 × 785 mm. Maximum package: 880 × 772 × 1,076 mm. Check doorways, turns and lifts against the package, and confirm unloading responsibility.

Prepare the Installation Space

Allow 50 cm at the side, 80 cm at the front, 20 cm at the back and 60 cm above. Use indoors at 15–30°C and 10–90% RH, non-condensing.

Confirm Handling & Power

Plan for 75.9 kg net weight and a 3–4 person lift. Do not lift using the recessed side area. Confirm the regional electrical version, grounded outlet, installation and applicable purchase terms.

T450 Frequently Asked Questions

Find clear answers about fit, configuration, materials and getting your T450 ready to print.

Will my part fit the T450?

The Raise3D T450 is designed for large-format industrial 3D printing. Whether your part will fit depends on its dimensions, orientation, and printing requirements.

To check compatibility, compare your part's length, width, and height with the T450's build volume. Keep in mind that supports, part orientation, and any required printing clearance may affect the available space.

If your part is an existing component or accessory that needs to fit or work with another assembly, dimensional accuracy, material selection, and functional requirements should also be considered.

Not sure if your part is compatible? Contact our team with your 3D model (STEP/STL), part dimensions, and material requirements. We'll help assess whether the T450 is suitable for your application.

Should I choose the T450 or T700?

Choose the T450 when your part, supports and process clearance fit its build volume. Consider the T700 for larger or taller parts, and check the installation space for either model.

T450 vs T700 at a glance
Compare	T450	T700
Build volume (W × D × H)	450 × 350 × 400 mm	700 × 500 × 1,000 mm
Machine size (W × D × H)	710 × 635 × 785 mm	964 × 792 × 1,478 mm
Nozzle diameter	0.4 mm default; 0.6 mm available	0.6 mm default; 0.4 mm available
Choose when	Your part and supports fit the T450 build volume.	You need more width, depth or height for your part.

Compare your part orientation, support requirements and available installation space. Confirm materials and the selected configuration before ordering.

Can I discuss a sample print before buying?

Share your part, material and application requirements with the Raise3D team to discuss a sample print.

Is the stand included?

The base is optional. Check the selected configuration and packing list to see whether it is included.

How will the T450 be delivered and installed?

Check the package dimensions and delivery route before delivery. Arrange a 3–4 person lift and confirm unloading, installation and training arrangements with Raise3D.

Which materials and accessories are compatible?

The Raise3D T450 supports a wide range of standard and engineering-grade filaments, including:

Hyper Speed: PLA, PLA Pro, ABS, PETG CF, PET CF
Industrial: PPA CF, PET Support, PPS CF
Premium: PLA, ABS, ASA, PETG, TPU-95A

Additional materials, including PPA GF, PET CF, PET GF, PETG ESD, PPA Support, and PVA+, are coming soon.

The T450 features a TwinFlow™ dual-extrusion system, wear-resistant SiC-tipped nozzles (0.4 mm standard, 0.6 mm available), and a flexible double-sided PEI build plate. It also supports the Raise3D Filament Station (RFS) for uninterrupted printing.

For specific material or accessory compatibility, please contact our team for assistance.

What does the warranty cover?

The Raise3D T450 comes with a 12-month limited warranty starting from the invoice date.

The warranty covers defects in materials and workmanship under normal and reasonable use. Eligible defective components may be repaired or replaced at no additional charge, subject to Raise3D's warranty terms.

Warranty services include remote technical support, eligible replacement parts, and software updates.

The warranty does not cover normal wear and tear, consumables (such as nozzles, hotends, and build plates after first use), accidental damage, misuse, unauthorized modifications, or improper maintenance.

For complete coverage details, exclusions, and warranty conditions, please refer to our T450 Full Warranty Terms.

Can I receive an invoice?

Yes, invoices are available upon request.

If you need an invoice for your purchase, please contact our US sales team at salesadmin@raise3d.us with your order number and billing details.

Our team will be happy to assist you with your invoice request.

What software does the T450 use?

Prepare models in ideaMaker on Windows, macOS or Linux, then transfer the prepared file through Wi-Fi, Ethernet or USB 3.0.

Choose Your T450 Configuration

Choose your configuration in the product purchase section, and confirm your delivery and setup requirements before ordering.

Choose configuration

Need help evaluating your application? Contact Raise3D.

Raise3D T450 Large-format 3D Printer

Meet the Raise3D T450

Why Choose the T450?

TwinFlow extrusion

Four-motor motion system

Temperature management

Filament loading and feeding

What Can You Make with the T450?

Housing Prototypes

Detailed Structural Samples

Jigs & Fixtures

Software & Connectivity

Prepare & Slice

Transfer Your File

Print & Monitor

See the Printing & Finishing Process

Printing process

Before support cleanup

Support removal

Surface and edge detail

Materials & Compatibility

Hyper Speed

Industrial

Premium

T450 Technical Specifications

Delivery & Workspace Preparation

Stafford, TX 77477 (Greater Houston Area)

Preorder & Shipping

1-Year Limited Warranty

Taxes at Checkout

Plan the Complete Delivery Route

Prepare the Installation Space

Confirm Handling & Power

T450 Frequently Asked Questions

Choose Your T450 Configuration

You may also like